| |
Software Versions
|
By |
Responses |
Views |
Last Updated |
|
|
[+/-]
PhidgetsServo 1-Motor Plugin
Working on a Plugin for the
PhidgetsServo 1-Motor USB controller
A sneak preview can be found on the PhServo Plugin page
So far the plugin allows t ..
I have interest in this plug-in. I am thinking about modifying my cat's door! So it can stay closed and no other cat enters the apartment. OK, a (cat)..
|
sse
|
1
|
699
|
08/30/2010 - 09:46 PM
By
JeanMu
|
|
|
[+/-]
Where can i download AbelCam 3.1.5?
Hi guys,
I upgraded to 3.1.6 and had a lot of problems so I rolled back to 3.1.5.
I then decided to take the strain off my computer by having a dedi ..
I just thought I should mention, I'm not looking for a license key, i already have that.
It's just a copy of the 3.1.5.exe that I'm after.
Thank you,..
3.1.5 is here:
http://www.multicamserver.com/en/membersonly/issues
I seriously doubt that disconnecting that gear is what broke your system. My firs..
That's great, thank you MelvinG!
Yeah, it's typical, I try to take the strain off the machine and it dies anyway!..
I'm the sort who leaves machines turned on for months at a time. I hardly ever have a harware failure, but when I do it almost always happens when com..
|
IainG
|
4
|
847
|
07/22/2009 - 10:24 PM
By
MelvinG
|
|
|
[+/-]
Camera list in Google Earth
Hi all
I was trying out some of the features of Google Earth.
The result is a Camera list viewable in Google Earth.
This list consists of three fol ..
What I have to do to make my webcam viewable in Map page?..
First: make sure that your cam pages can be accessed from the Internet. This will involve configuring the AbelCam webserver features and probably your..
First: make sure that your cam pages can be accessed from the Internet.
I upload to server, I'm not running server on my PC. We have web pages, my we..
You're going to need to talk to SSE about this - he runs the List and Map on his servers. An email sent to the address on the Support page will reach..
Thank's a lot Melvin!..
I asked SSE, if I understood him right, my non profit community which is owner of Pro license have no right to get on list.
Lot of hope for nothing.
..
my non profit community which is owner of Pro license have no right to get on list.As I emailed you earlier, you may have your cam listed on the map p..
THX Melvin & SSE
As I'm not native English speaker, lot of things I understood false.
1. AbelCam/Web/My AbelCam on the internet
I though that with ..
3) I should have said something in my 3/13/2008 post about making sure that Webserver was checked, instead of just saying you needed to check Listed...
THX
(We all speak English but nobody have time to sit and translate...
community is about sport, ecology and health life, Cres is biggest Croatian is..
sse said:
In order to get listed on the Camera list or the Camera Map, you'll have to point the Server URL to your AbelCam installation, otherwise it ..
Hi again.
I build up second webcam on another PC, but both licenses are on my name.
I wish to set location for second webcam, but when I go to:
htt..
...but both licenses are on my name.
You used a different name for the 2nd license and received new login information.
Use the new login to set the lo..
|
sse
|
13
|
2997
|
07/07/2009 - 02:06 PM
By
sse
|
|
|
Latest Beta release supports PTZ with any camera
The latest AbelCam version comes with Virtual PTZ
- set the webcams input resolution high (eg 800x600)
- set the output resolution to something small ..
|
sse
|
0
|
789
|
06/06/2009 - 09:33 AM
By
sse
|
|
|
[+/-]
Translators wanted
For more than half a year we are working hard on the next major release of AbelCam.
One of the new features is the support for languages.
I have tran ..
I can try to translate it into Finnish language.
..
I can try to translate it into Portuguese language...
I can also help with the Portuguese translation. I say help because our friend RibeiroS has already offered to work on it.
I'll be more than happy t..
Almost forgot: I can also do Spanish! ..
Hello Ricardo
so far Ribeiro has not started working on the translation.
I'll send you the information required.
Somebody else got in contact with m..
I might be able to do french but it might not be very good...
Thank you Andrew
Translating is not easy - I'd prefer a native speaker to give a try.
I also speak french and italian, but after completing the germa..
I can try to translate it into Slovenian language. I allready did it with Snitz Forums and acouple of HAM (radioamateur) programs.
..
Hello Tom
thank you - I'll email the information for the translation interface...
Ok for Spanish and french ..
I can try to translate it into Dutch language ..
If additional help in Brazilian Portuguese is needed, I'll be more than happy to colaborate...
Waldemar,
so far the only foreign language completed is german, finnish and spanish are almost there.
Is there a difference (in computer terms) with ..
I can translate Spanish. I'm native Spanish.
King Regards...
Found a translator for French?
If not, how long have you needed to translate 1080 sentences to German?
(I'm a native French)
Rgds,..
Hello Werner
no, nobody for French yet.
The translation to german took me about 2 hours, but as I know the program quite well probably it will take..
I can do your french translation. I am the one who did the original french translation for osdate dating software. ..
I'll help with the Danish translation
/Tommy..
I can translate in French very easy
Thank you
Donald..
I will translate it without problem to Polish..
If you want Swedish, let me know...
Brgds,
Torbjorn..
There are some mistakes (compound words, bad language) and some english words, even Finnish word also exists, in Finnish translation. I could make som..
I will translate it into French.
Et ce sera fait avec grand plaisir.
Alain..
Alain, I sent you the information required. Thank you!..
I can translate it to Finnish...
O.K I can do a try on Spanish (latin american sort)..
|
sse
|
26
|
11970
|
04/21/2009 - 01:49 AM
By
MiguelB
|
|
|
[+/-]
New Name is out
Hi all,
last night I sat with my family at the diner table, and we were discussing names for the software.
I was not very happy with the proposals t ..
Lets say that AbelCam is much better than LogiSphere and lets keep with it :]..
I love the name (in fact, the geneis of it), BUT I am afraid your are putting yourself at risk again.
AbleCam is really close to AbelCam, and, while ..
Hi Stefan,
I think the name AbelCam is ok but I can imagine the owner of abelcam.com has a problem with you taking his name! I would prefer taking a ..
I am sure I will survive - if the name will, we'll see.
My choice might be advantageous to ablecam.com - people are more likely to miss-spell towards..
AbelCam and the History is good, But there can be annoyance. I think, better simply and personal seizcam.
All property
Manfred by http://www.angelpag..
Don’t use a name that is the same as another business, just more problems down the road. Use a name that you can protect for yourself and you alone...
Wouldn't use any name close to another, might get more problems, better play safe..
Personal name should keep the problems in safe distance, also I do..
Hi,
I suppose you will perhaps have the same problems with abelcam... ablecam...
I agree with Manfreds, Seizcam is a good idea.
Bye, Jump..
I'm afraid I have to agree with the previous posters, using a name that's so close to a another one (with only 2 letters transposed, and even pronounc..
Stefan
'Out of the frying pan into the fire' comes immediately to mind.
My first response to you number of days ago was to check that no one else was..
I agree with most of the previous posters. AbelCam is to close to AbleCam. You will almost certainly end in a name battle you just ended. If I had to ..
I'm afraid I'm in the “don't like it” boat here.
I really hate the name. I mean, REALLY hate it. No insult intended here, but it belittles the pr..
I dont like Abelcam. My choice would have been some flavor of Multicamxx.
Dennis..
We just hopped out of the fire
There were some objections in the past against renaming LxxxSphere to AbelCam because the very similar domain name ab..
Hi, Stefan,
had some ideas today:
ARASCaS: Advanced Recognition And surveilance CAmera System
(in case in the future some advanced face recognitio..
Hi, Stefan,
had some ideas today:
ARASCaS: Advanced Recognition And surveilance CAmera System
(in case in the future some advanced face recognitio..
Hi, Stefan,
had some ideas today:
ARASCaS: Advanced Recognition And surveilance CAmera System
(in case in the future some advanced face recognitio..
Thank you, Tom
For now I will stick with the name AbelCam.
I see you are creative with names - if I have a new project to name, I will ask you for so..
|
sse
|
18
|
1805
|
02/27/2009 - 05:46 AM
By
sse
|
|
|
[+/-]
Convert JPEG to DV pal
Each day my camera makes 3500 pictures
The program CONVERT JPEG does a wonderful job to convert these images into 5min of video
However it converts t ..
That is controlled by which codec and/or profile you select. If you choose WMV instead of AVI, there are some PAL profiles you can select from the lis..
|
GaidaroS
|
1
|
1162
|
10/11/2008 - 04:08 AM
By
MelvinG
|
|
|
[+/-]
making windows XP more efficient
I am running Abelcam on a rather an old PC
Pentium II with 160MB memory
I have windows XP Pro installed.
I have two webcams, Logitech quickcam and Mi ..
Are you using a good powered USB hub? Cameras draw quite a large amount of power - I have had many problems with cameras stopping because of power bei..
since then I have upgrade the computer, it did not work out
thanks for the ideas..
Gaidaro,
did you enable the SelfCheck?
This check makes sure the cameras are in working condition and restarts them if needed.
If problems continue,..
|
GaidaroS
|
3
|
2427
|
06/24/2008 - 07:08 PM
By
sse
|
|
|
AbelCam 2.2.2 supports Orbit AF
Release 2.2.2 is available for Members.
it supports the latest Logitech Orbit/Sphere AF
http://www.dyn.webtruck.org:8100/index.html?cam=9
This rele ..
|
sse
|
0
|
818
|
11/05/2007 - 12:40 PM
By
sse
|
|
|
[+/-]
LogiSphere is going to control RC servos
I am working on support for the Parallax Servo Controller.
If my plans become reality, both the USB and the serial Servo Controller (Parallax Stock # ..
the possibilities only begin when you do something like that... using servos to control a robot with a camera on top, and the camera with it's own mot..
Very good idea Steven!
With that functionality any one can control motorized doors, satellites, and so on......
Sounds like the perfect solution to controlling the robotic arm you currently own, SSE ..
I agree this is what my robot and its distributed network needs. I have one mobile bot with a servo head and arm and several stationary platforms arro..
Follow this thread..
|
sse
|
5
|
2608
|
08/25/2007 - 08:27 AM
By
sse
|
|
|
AbelCam 2.1.3 available for Members
AbelCam 2.1.3 brings two major changes:
- support for the Typhoon Motion Cam
- support for the AbelCam Network Camera Agent
Download 2.1.3 ..
|
sse
|
0
|
586
|
07/06/2007 - 06:35 PM
By
sse
|
|
|
Shop Updated
The Shop has been updated.
Changes
- license verification process has been changed make sure new licences are registered with the correct person.
- ..
|
sse
|
0
|
500
|
06/28/2007 - 12:01 PM
By
sse
|
|
|
LogiSphere 2.0.8 Release 2007-01-18 available for Members
as announced in yesterdays Email (to those who wanted to receive upgrade infos),
this version is available for Members now.
New Features:
- Caption ..
|
sse
|
0
|
657
|
01/19/2007 - 12:09 PM
By
sse
|
|
|
[+/-]
LogiSphere 2.0.6 available for Members
LogiSphere 2.0.6 has been released to Members.
New Features
- Push Broadcast for Video Server
Now you can broadcast to a Windows Media Server Publis ..
LogiSphere 2.0.6 has been updated:
- Improved support for TV tuners and capture devices with multiple video inputs
More about this release in th..
|
sse
|
1
|
577
|
12/14/2006 - 11:43 AM
By
sse
|
|
|
[+/-]
LogiSphere 2.0.5 & 2.0.6 Pro
Am I a little behind, as I am not seeing the new version anywhere but on other users Cam Servers? I've tried the NT Wrapper, it starts Logisphere but ..
Maxwell, if you are set up to access the Issue Tracker then following THIS LINK will get you to the version you are looking for.
If the link doesn't ..
Thank you Melvin.
All LogiSphere Members have Access to the LogiSphere Issue Tracker.
The URL above will make sure you have Cookies set correctly and..
|
MaxwellB
|
2
|
629
|
12/04/2006 - 02:37 PM
By
sse
|
|
|
[+/-]
Blog for LogiSphere Members
I have set up a Blog for LogiSphere Members.
Right now, there is only a Sandbox to see if it works.
You'll have to login using your LogiSphere Membe ..
Categories (maybe):
Useful software-software that works with logipshere proxy, x10 etc.
New Webcams-Reviews of new webcams that work with logipshere
O..
Tried to Install NG yesterday,
Pentium 4, Windows XP Pro.
No webcam attached.
Uninstalled 1.6 first, then installed NG.
When I ran it, I got the Pop-u..
You need .net framework 2.0 to run logipshereNG
Andrew..
|
sse
|
3
|
504
|
09/08/2006 - 05:58 PM
By
AndrewG
|
|
|
LogiSphere NG 1.9.5 theta released to Members
LogiSphere has become more versatile and feature rich in the last three months.
A team of experienced web and application developers has helped to b ..
|
Abel
|
0
|
550
|
09/04/2006 - 05:04 PM
By
Abel
|
|
|
Updated GeoIP information available
There is a fresh IP country information data file.
If you're using the country detection feature,
you might want to replace this file:
C:\Program Fil ..
|
sse
|
0
|
419
|
07/06/2006 - 10:43 AM
By
sse
|
|
|
LogiSphere 1.6 released
LogiSphere 1.6 released
Previous Versions:
1.5.1 | 1.5.2 | 1.5.6 | 1.5.7 | 1.5.8 ..
|
sse
|
0
|
617
|
05/15/2006 - 11:14 AM
By
sse
|
|
|
[+/-]
LogiSphere 1.5.3 relased to Pro Members
LogiSphere now supports a next tilt/pan device: the Creative Live! Motion.
Changes for the Logitech Orbit / Sphere
I changed the position grid from t ..
Anyone know where the download link is for 1.5.3?
Skid..
It's on the way to you - I sent another email..
known bug
A vertical more from +100 to 0 results in a vertical move to -100
This will be fixed in the next version, which should be released mid mont..
Stefan,
I have serious connection problems with the new 1.5.3 version.
When I start the webserver it gives a message "incorrect connection request"
W..
Had an error when closing the chat window tonight.
It resulted in a error dialog with the following in a detail result box.
See the end of this mess..
From DennisLa:
Had an error when closing the chat window tonight.
It resulted in a error dialog with the following in a detail result box.
[..]
Hello..
Hi,
Nobody else has the problem of Password with 1.5.3 ?
I tried again and again without result.
Bye - J-C..
From DennisLa:
Had an error when closing the chat window tonight.
It resulted in a error dialog with the following in a detail result box.
[..]
Hell..
OK, now that I know what you've done I am able to reproduce it on my end - I will fix this as soon as possible.....
Sorry, I was tired last night and did not think it through before posting the message. When I thought about it this morning I realized I left out a fe..
Hi,
With the 1.5.8 version, the password system is working...
Thanks SSE for the correction of this small problem I've found in version 1.5.3
J-Cha..
|
sse
|
11
|
1000
|
05/14/2006 - 07:29 AM
By
JeanG
|